Description
Combo includes
- HLX-C (Torq HLX Fullsize Cyclic Servo) * 3pcs
- HLX-T (Torq HLX Full Size Tail Servo)* 1pcs
Recommended for helicopters sized 600 – 700
HLX-C – Torq HLX Fullsize Cyclic Servo
Features:
– Using the newest Hall Sensor Technology
– Incredible Levels of Speed & Performance
– Ultra Precise, High Resolution Control
– Fully New Design Steel Gear Train for Maximum Strength
– 8.4V High Voltage Ready
– Optimized for Heli, Airplane & Jet Aircraft
– 6 Ball Bearings Construction
Speed:
0.07 sec / 60° @ 8.2V
0.09 sec / 60° @ 7.4V
0.11 sec / 60° @ 6.0V
Torque:
35Kg.cm / 486,05 oz in. @ 8.2V
30Kg.cm / 416,62 oz in. @ 7.4V
24Kg.cm / 333,29 oz. in. @ 6.0V
Specifications:
Motor Type: Brushless
Servo Arm Type: Futaba
Working Frequency: 1520us / 333Hz or 760us / 560Hz (need the TBOX Program Card)
Weight: 80g
Dimensions: 40mm x 20mm x 40mm (LxWxH)
Voltage Range: 6.0V – 8.4V
Usage Note: Servo Grommet is suggested use if you use our servo on Nitro Heli.
HLX-T – Torq HLX Full Size Tail Servo
Features:
– Using the newest Hall Sensor Technology
– Blistering 0.035 Second Transit Speed
– Dedicated Helicopter Rudder Servo
– Incredible Levels of Speed & Performance
– Ultra Precise, High Resolution Control
– Newly Design Steel Gear Train for Maximum Strength
– Excellent Thermal Dissipation via Finned 6061 Aluminum Case
– 8.4V High Voltage Ready
– Optimized for High Demand Rudder Control
– 6 Ball Bearings Construction
Speed:
0.03 sec / 60° @ 8,2V
0.035 sec / 60° @ 7.4V
0.04 sec / 60° @ 6.0V
Torque:
13.0Kg.cm / 180,53 oz. in. @ 8.2V
11.0Kg.cm / 152,76 oz. in. @ 7.4V
9.0Kg.cm / 124,98 oz. in. @ 6.0V
Specifications:
Motor Type: Brushless
Servo Arm Type: Futaba
Working Pulse Width / Frequency: 760us / 560Hz450us-1050us
Weight: 80g
Dimensions: 40mm x 20mm x 40mm (LxWxH)
Voltage Range: 6.0V – 8.4V
Usage Note:
- For helicopter rudder usage only. Please note that the TORQ HLX-T servo must be connected to a flybarless flight controller that is set at a 760us pulse width setting for proper functionality. Due to the 760us pulse width, if the servo is connected to a receiver or servo tester, the servo will not properly function due to these applications that use a 1520us pulse width.
- Servo Grommet is suggested use if you use our servo on Nitro Heli.
Reviews
There are no reviews yet.